Sony PXW-X200 Operating Instructions Manual page 25

Restoring USB Flash Drives
When you load a USB flash drive that cannot be
mounted normally because the file system is
destroyed, a message appears on the LCD
monitor/EVF screen to ask whether you want to
restore it.
Using the up/down/left/right buttons or the jog
dial, select "Execute," then press the SEL/SET
button or the jog dial. The in-progress message
and status bar (%) are displayed, and restoration
is started.
When restoration is completed, the message
"Restore USB Memory Done" is displayed.
• "XQD" is a trademark of Sony Corporation.
Using Other Media 25