Changing The Proxy Recording Setting; About The Recorded File; Storage Destination Of The Recorded File; About The File Name - Sony PXW-X200 Operating Instructions Manual

Recording, Clip Continuous Recording, and Slow &
Quick Motion to off, and set "Proxy" of the CAMERA
SET menu to "On" (page 88).
• Data integrity is not guaranteed if the power is turned
off or an SD card is removed while it is being accessed.
Data on the SD card may be destroyed. The camcorder
does not have the salvage function that can recover the
damaged material. Be sure that the camcorder is turned
off when you remove the SD card from the camcorder.
Be sure that the ACCESS lamp of the used SD card is
turned off when you turn the camcorder off.
• Make sure that the SD card does not pop out when
inserting or removing it.
Changing the Proxy Recording
Setting
Setting the picture size
Select the picture size with "Size" in "Proxy File"
(page 109) of the OTHERS menu.

About the Recorded File

The file system of the recorded file is FAT32, and
the file extension is ".mp4."
The timecode is also recorded simultaneously.
Storage Destination of the
Recorded File
The recorded file is stored under the "/PRIVATE/
PXROOT/Clip" directory.

About the File Name

The file name is same as the clip name that is
recorded on an SxS memory card.
When "Match Clip Name" is set to "Off," the file
name generated as the timecode at the start of
recording. (Example: When the recording starts at
14:30:20 05 frame, the file name will be
"14_30_20_05.mp4.") If there is the file that was
recorded at same time, the camcorder does not
overwrite it and the serial number is added to the
new file name.
Connecting to Other
Device via Wireless LAN
You can make a wireless LAN connection
between the camcorder and a device such as a
smartphone or tablet by attaching the supplied
IFU-WLM3 USB wireless LAN module.
Notes
• You cannot use a USB wireless LAN module other
than the IFU-WLM3.
• You cannot make a wireless LAN connection when
"Format" in "System" is set to the following settings.
XAVC-L50 1080/59.94P, 50P
XAVC-L35 1080/59.94P, 50P
Making a wireless LAN connection between a
device and the camcorder enables you to do the
following.
• Remote operation via a wireless LAN
You can control the camcorder from a
smartphone, tablet, or computer that is
connected to the camcorder via the wireless
LAN.
• File transferring via a wireless LAN
You can transfer a proxy file (low resolution)
that is recorded on an SD card in the camcorder
or original file (high resolution) that is recorded
by the camcorder to the server via the wireless
LAN.
• Video/audio streaming via a wireless LAN
You can create a stream (H.264/AAC-LC
compression) from the video/audio of a
camcorder, and watch the video/audio
streaming by using the "Content Browser
Mobile" application that is installed on a
smartphone, tablet, or computer via the wireless
LAN.
"Content Browser Mobile" application
You can operate the camcorder remotely while
streaming the audio/video of the camcorder, and
perform the settings of the camcorder by using the
"Content Browser Mobile" application.
For details about the "Content Browser Mobile"
application, contact your Sony dealer or a Sony
service representative.

Connecting to Other Device via Wireless LAN

55