Sony PXW-X200 Operating Instructions Manual page 97

LCD/VF SET
Menu items Subitems and setting values Contents
Marker
Setting
On / Off
Setting the
markers added to
Safety Zone
pictures on the
On / Off
LCD monitor/EVF
Safety Area
screen
80% / 90% / 92.5% / 95%
[M]
Center Marker
On / Off
Aspect Marker
Line / Mask / Off
Aspect Select
4:3 / 13:9 / 14:9 / 15:9 / 1.66:1 /
1.85:1 / 2.35:1 / 2.4:1
Aspect Mask
90% / 80% / 70% / 60% / 50% /
40% / 30% / 20% / 10% / 0%
Guide Frame
On / Off
Zebra Setting
On / Off
Setting the zebra
pattern
Zebra Select
[M]
1 / 2 / Both
Zebra1 Level
50 to 107 (70)
Display On/Off Video Level Warnings
On / Off
Selecting the items
to be displayed on
Sending Clip Info
the LCD monitor/
On / Off
EVF screen
Brightness Display
[M]
On / Off
Histogram Display
On / Off
Lens Info
Meter / Feet / Off
Zoom Position
Number / Bar / Off
Turn all marker indications on/off in combination.
Turn the safety zone marker on/off.
Select the size (ratio to the entire screen) of the safety zone
marker.
Turn the center marker on/off.
Select the aspect marker.
Line: To show white lines
Mask: To lower the video signal level of areas outside the
marker range.
Off: To not display
Note
No aspect marker is displayed when a video format of EC
(Edge Crop) is selected in SD Mode.
Select the ratio of the aspect marker.
When "Aspect Marker" is "Mask," select the brightness of
images outside the aspect marker.
Turn the guide frame marker on/off.
Turn the zebra function on/off.
Select the zebra pattern(s) to be displayed.
1: To display only Zebra1 (the default is 70%) for an area
within ±10% of the "Zebra1 Level" video level.
2: To display only Zebra2 (the default is 100%) for a video
level over 100%.
Both: To display both zebra 1 and zebra 2
Set the display level of zebra 1.
Turn the warning indication to be displayed when the picture
is too bright or too dark on/off.
Display the uploading status of a clip while connected with
the wireless LAN.
Turn the numeric indication to show the picture brightness on/
off.
Turn the histogram indication to show the level distribution of
the picture on/off.
Select the depth-of-field indication.
Meter: To indicate in meters
Feet: To indicate in feet
Off: To not indicate
Select the type of zoom position indication.
Number: Indication with a number
Bar: Indication with a bar
Off: To not display
Setup Menu List 97