Table of Contents
Advertisement
in the following cases. When this happens, refresh the
browser on the device.
—when the camcorder is restarted while the Wi-Fi
connection is established
—when the camcorder is controlled directly while
the Wi-Fi connection is established
—when the device is reconnected
—when you operate forward/backward on the
device’s browser.
• If the Wi-Fi signal is poor, the Wi-Fi remote
commander may not work properly.
About the Web Menu
The Web menu of the camcorder appears by
accessing the camcorder from the browser of a
device that is connected to the camcorder via a
wireless LAN. You can perform the settings for the
wireless function or the operation of the file transfer.
Initial screen
When connecting the camcorder and device, and
accessing the camcorder from the browser on the
device, the “SD Card” screen in “Media Info” of
the camcorder appears on the browser.
About the setting menu
The setting menu appears by touching
at the
upper left of the screen. Touch the item that you
want to set.
“Device Status”
• “Short Cut”
“Media”: Short-cut button for the “SD Card”
screen (page 59)
“Format”: Short-cut button for the “Format”
screen (page 63)
• “Status”
“Wireless Module”: Status indication for proxy
recording
“Recording”: Recording a proxy file
“Stop”: Recording is stopped
“Remain”: SD card remaining space indication
“Warning/Error”: Warning/Error indication
(“Wxx-xxx” is a warning number. “Exx-xxx” is
an error number (page 141))
• “Network”
“Wireless LAN IP Address”: Camcorder’s IP
address
• “Hardware”
“Serial Number”: Camcorder’s serial number
“OSS Information”: Copyright information
Page 62
- Quick Links:
- Video Formats
- White Balance
- Changing Format
Hide quick links:
Advertisement
Table of Contents
