Sony PXW-X200 Operating Instructions Manual page 57

4
Activate the NFC function.
Select "Execute" for "NFC" in "Network"
(page 109) of the OTHERS menu, or press
the assignable button to which "NFC" is
assigned.
5
Hold the smartphone near the
camcorder.
The smartphone is connected to the
camcorder and "Content Browser Mobile"
starts.
The "AP" indication appears on the LCD
monitor/EVF screen when smartphone is
connected to the camcorder.
Notes
• Cancel the sleep or screen lock function of the
smartphone in advance.
• Hold the device near to the camcorder without moving
the device until "Content Browser Mobile" starts (1 to
2 seconds).
Connecting to a WPS-compatible device
You can connect the camcorder to a WPS-
compatible device by using the WPS function.
1
Turn the camcorder on.
2
Set "Wi-Fi&Proxy/USB" in "Network"
(page 109) of the OTHERS menu to
"Wi-Fi&Proxy."
Note
It may take time (for about 1 minute) until the
wireless LAN function is activated.
The radio wave intensity indication on the LCD/
EVF screen flashes. Wait until the radio wave
intensity indication stops flashing.
3
Set "Wi-Fi Func. Mode" in "Network"
(page 109) of the OTHERS menu to
"Access Point."
The "AP" indication appears on the LCD
monitor/EVF screen.
4
Select "Execute" for "WPS" in
"Network" (page 109) of the OTHERS
menu.
5
Select "Network Setting" > "Wi-Fi
Setting" on the device, then set "Wi-Fi"
to on.
6
Select the camcorder's SSID from the
SSID list in "Wi-Fi Network" on the
device, then select "WPS Push Button"
in "Option" on the device.
Notes
• The operation method differs depending on the
device.
• For the SSID and password of the camcorder,
check "SSID&Key" in "Network" (page 109) of
the OTHERS menu.
7
Start the browser on the device, then
access "http://192.168.1.1:8080/
index.html."
The screen for inputting "User Name" and
"Password" appears.
For the user name and password of the access
authentication, check "User Name" and
"Password" in "Network" (page 109) of the
OTHERS menu.
8
Input the user name and password, then
select "OK."
Connecting by inputting an SSID and
password on a device
You can connect the camcorder to a device by
inputting an SSID and password on a device.
1
Turn the camcorder on.
2
Set "Wi-Fi&Proxy/USB" in "Network"
(page 109) of the OTHERS menu to
"Wi-Fi&Proxy."
Note
It may take time (for about 1 minute) until the
wireless LAN function is activated.
The radio wave intensity indication on the LCD/
EVF screen flashes. Wait until the radio wave
intensity indication stops flashing.
Connecting to Other Device via Wireless LAN 57