Sony PXW-X200 Operating Instructions Manual page 108

OTHERS
Menu items
Plan.Metadata
Setting planning
metadata
108 Setup Menu List
Subitems and setting values Contents
Load/Slot(A) or Load/Slot(B)
Execute / Cancel
Load/USB
(in UDF or exFAT)
Execute / Cancel
Properties
Execute / Cancel
Clear
Execute / Cancel
Clip Name Disp
Title1 (ASCII) / Title2 (UTF-8)
To load planning metadata from the SxS memory card in slot
A or B.
Selecting "Execute" displays the list of the planning metadata
files stored on the SxS memory card in slot A or B. Specify a
file, select "Load" then "Execute" for loading.
Notes
• The file list displays up to 64 files. Even if the total number
of planning metadata files is 64 or less, all of the planning
metadata files may not appear if the directory where they
are located in the SxS memory card (General/Sony/
Planning) contains 512 or more files.
• After you start loading, do not remove the SxS memory
card until the completion message is displayed.
Loads planning metadata from the USB flash drive connected
to the external device connector.
Select "Execute" to show the list of the planning metadata
files stored in the USB flash drive and select a file to be
loaded.
Select "Execute" to display the detailed information of the
planning metadata loaded in the camcorder.
File Name: Filename
Assign ID: Assignment ID
Created: Time and date of creation
Modified: Time and date of most recent modification
Modified by: Name of person who modified the file
Title1: Title1 specified in file (clip name in ASCII format)
Title2: Title2 specified in file (clip name in UTF-8 format)
Material Gp: Number of material groups (groups of clips
recorded using the same planning metadata)
Shot Mark1: Name defined for Shot Mark 1
Shot Mark2: Name defined for Shot Mark 2
When you select "File Name," "Assign ID," "Title1," or
"Title2" on the Planning Metadata Properties screen and then
press the SEL/SET button or the jog dial, the selected item is
displayed on the full screen, permitting you to check a long
file or clip name at a glance.
Note
Names of shot marks cannot be displayed on the full screen
even if you select Shot Mark1 or Shot Mark2.
Select "Execute" to clear the planning metadata loaded in the
camcorder.
Select the display mode of the clip name specified in planning
metadata.
Note
When both an ASCII format name and a UTF-8 format name
are specified in planning metadata, the UTF-8 format string is
used as the clip name. If only either ASCII-format name or
UTF-8 format name is specified in planning metadata, the
specified name is displayed regardless of the menu setting.