Sony PXW-X200 Operating Instructions Manual page 85

Solid-state memory camcorder
Hide thumbs Also See for PXW-X200:
Table of Contents

Advertisement

CAMERA SET
Menu items
Subitems and setting values Contents
SLS/EX SLS
Setting
OFF / 2 / 3 / 4 / 5 / 6 / 7 / 8 /
Setting the Slow
16 / 32 / 64
Shutter mode/
Supersensitized
Slow Shutter mode
MF Assist
On / Off
Turning the MF
Assist Function
on/off
Color Bars
Camera/Bars
Camera / Bars
Setting the Color
Bars
Bars Type
Multi / 75% / 100% / SMPTE
Flicker Reduce
Mode
Auto / On / Off
Setting Flicker
Compensation
Frequency
50 Hz / 60 Hz
60 Hz: UC model
50 Hz: Other models
Set the number of cached frames.
Notes
• This cannot be set while recording and playing, or while the
thumbnail screen is displayed.
• This cannot be set while using Slow & Quick Motion or
Cache Recording mode
• "SLS/EX SLS" cannot be set if the video format is set to the
following settings.
HQ 1280×720/23.98P (UDF HD Mode or exFAT HD
Mode)
XAVC-L50 1080/59.94P (exFAT HD Mode)
XAVC-L50 1080/50P (exFAT HD Mode)
XAVC-L35 1080/59.94P (exFAT HD Mode)
XAVC-L35 1080/50P (exFAT HD Mode)
SP 1440×1080/23.98P (FAT HD Mode)
Set to "On" to precisely adjust the focus automatically after
you roughly adjust it manually.
Select "Bars" to output color bars.
Select the type of color bar to be output when "Bars" is
selected.
Multi: Multiformat color bars are output.
75%: To output 75% color bars
100%: To output 100% color bars
SMPTE: To output SMPTE color bars.
Set the operation of the Flicker-Reduction function.
On: To always activate it
Auto: To automatically activate it when flicker is detected.
Off: To not activate it
Notes
• It is recommended to set this to "Off" when shooting
outdoors or under lighting that does not cause flicker. (It
can be also "Auto," but the compensation may not be done
properly.)
• It is recommended to set this to "Auto" when shooting
indoors or under various lighting that may cause flicker,
such as fluorescent, sodium, or mercury-vapor lamps. (If
continuously shooting under lighting that may cause flicker,
"Mode" should be set to "On.")
Set to the power supply frequency of the light source causing
flicker.
Setup Menu List
85

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents