Slow & Quick Motion - Sony PXW-X200 Operating Instructions Manual

Preparatory settings
Before starting Picture Cache Recording, set
"P.Cache Rec" (page 87) of the CAMERA SET
menu.
"Setting" for Picture Cache Recording can also be
set to "On"/"Off" by assigning it to an assignable
button (page 37) and using that button.
When the setting has been made, the special
recording/operation status indication block on the
screen shows "zCACHE," with z in green
(page 13).
Performing Picture Cache Recording
Press the REC START/STOP button.
Recording begins, and stored video in the cache
memory is written first to the SxS memory card.
The on-screen " CACHE" indication changes to
z
" REC" ( is red).
z z
To cancel the Picture Cache Recording function
Set "Setting" in "P.Cache Rec" of the CAMERA
SET menu to "Off" or press the assignable button
to which you assigned the Picture Cache function.
Notes
• If you change the recording format, the cached data are
cleared and caching is newly started. Therefore, data
cached before you changed the format cannot be
recorded if you start Picture Cache Recording
immediately after changing the format.
• If you start/stop Picture Cache Recording immediately
after you insert an SxS memory card, data may not be
recorded on the card.
• Picture caching starts when you activate the Picture
Cache Recording function. Therefore, video before the
function is activated cannot be recorded with Picture
Cache Recording.
• Picture Cache Recording is invalid for external input
signal (HDV).
• As picture caching is disabled while an SxS memory
card is being accessed, such as during playback, Rec
Review, or thumbnail screen display, Picture Cache
Recording of such a period cannot be made.
• Although you can change the cache time setting while
recording, any new value becomes valid only after
recording has stopped.
40 Useful Functions
Slow & Quick Motion
When the camcorder is in UDF HD Mode, exFAT
HD Mode, or FAT HD Mode and the video
format (page 105) is set to one of the following
settings, you can set the recording frame rate and
playback frame rate to different values.
NTSC Area
HD422 50/1080/29.97P
HD422 50/1080/23.98P
HD422 50/720/59.94P
HD422 50/720/29.97P
HD422 50/720/23.98P
XAVC-I 1080/29.97P
XAVC-L50 1080/29.97P
XAVC-L35 1080/29.97P
XAVC-I 1080/23.98P
XAVC-L50 1080/23.98P
XAVC-L35 1080/23.98P
XAVC-I 720/59.94P
XAVC-L50 720/59.94P
HQ 1920×1080/29.97P
HQ 1920×1080/23.98P
HQ 1280×720/59.94P
HQ 1280×720/29.97P
HQ 1280×720/23.98P (FAT HD Mode only)
PAL Area
HD422 50/1080/25P
HD422 50/720/50P
HD422 50/720/25P
XAVC-I 1080/25P
XAVC-L50 1080/25P
XAVC-L35 1080/25P
XAVC-I 720/50P
XAVC-L50 720/50P
HQ 1920×1080/25P
HQ 1280×720/50P
HQ 1280×720/25P
Notes
• Slow & Quick Motion recording cannot be used in SD
Mode.
• Slow & Quick Motion cannot be set to "On"
simultaneously with Frame Recording, Interval
Recording, Picture Cache Recording, Clip Continuous
Recording, or Proxy Recording. When you set Slow &
Quick Motion to "On," these other functions are
forcibly set to "Off."
• Slow & Quick Motion mode cannot be used while
recording, or while using Recording Review or Freeze
Mix.
• Slow & Quick Motion mode cannot be used when
"SLS/EX SLS" (page 85) of the CAMERA SET menu
is set to other than "OFF."