Sony PXW-X200 Operating Instructions Manual page 11

Card slot block
The SxS memory card slots and EJECT buttons
are located behind the cover.
Open the cover
1.
ACCESS lamps (page 21)
2.
SxS memory card slots (page 21)
3.
EJECT (SxS memory card eject) buttons
(page 21)
4.
SLOT SELECT (SxS memory card select)
button (page 21)
Rear connector panel
1
2
3
4
2
1.
External device connector (page 24, 56)
3
2.
PC connector (page 112)
3.
i.LINK (HDV/DV) connector (4-pin, S400
conforming to IEEE1394) (page 112)
4.
A/V OUT (audio/video multi output)
connector (page 112)
4
5.
N mark
• Hold a NFC-compatible smartphone near
this mark when making wireless
connection between the camcorder and
smartphone. For details, refer to the
operating instructions of the smartphone.
• NFC (Near Field Communication) is the
international standard for the short range
radio communication technique.
6.
HDMI OUT connector (page 111)
7.
SD card ACCESS lamp
Lights in red while accessing the loaded SD
card.
8.
SD card slot for proxy recording (page 54)
9.
SDI OUT (serial digital output) connector
(BNC type) (page 111)
10.
TC IN (timecode input)/TC OUT
(timecode output) connector (BNC type)
(page 117)
11.
IN/OUT (input/output change) switch
(page 118)
Set this to IN to select TC IN and GENLOCK
IN, and set this to OUT to select TC OUT and
VIDEO OUT.
12.
GENLOCK IN/VIDEO OUT (analog
video output) connector (BNC type) (page
111, 117)
1
5
6
7
8
9
10
11
12
Part Identification 11