Changing Proxy Recording Settings; Checking Proxy Recording Settings; Planning Metadata Operations; Loading A Planning Metadata File Into Camcorder's Internal Memory When Recording A Clip - Sony PXW-X500 Operation Manual

To stop recording of proxy data
Stop recording and set Operation >Proxy
Recording Mode >Setting in the setup menu to
[Off].
If recording fails
"Media(Proxy) Error" or "Write Error" appears.
If recording fails due to insufficient free
remaining capacity on the SD card, "NG: Not
Enough Capacity" appears.
Changing Proxy Recording
Settings
Select Operation >Proxy Recording Mode >Size
and Audio Channel in the setup menu to change
the settings for the size of the proxy recording
format and the audio channel for proxy recording,
respectively.
Checking Proxy Recording
Settings
Select Operation >Proxy Recording Mode
>Frame Rate and Bit Rate in the setup menu to
view the settings for the video frame rate and
video bit rate, respectively.
Planning Metadata
Operations
Planning metadata is information about shooting
and recording plans, recorded in an XML file.
Example of a planning metadata file
You can shoot using clip names and shot mark
names defined in advance in a planning metadata
file.
Note
Use a font set that is compatible with the language set
using Maintenance >Language in the setup menu when
defining clip names and shot mark names. Using fonts
for a language that is different from the language setting
on the camcorder may cause characters to be displayed
abnormally.
Loading a Planning Metadata File
into Camcorder's Internal Memory
when Recording a Clip
Note
Data cannot be loaded from SDXC cards.
1
Save the planning metadata file on an
SxS memory card beforehand.
Planning metadata files are stored in the
"General/Sony/Planning" directory.
2
Insert the SxS memory card in slot A or
B.
73