Ignition Controlled Door Lock/Unlock(Programmable); Passive Immobilizer (Programmable); Car Search Mode; Valet Mode - Eaglemaster E5 G7 User Manual

- Car search mode:

The system provide a feature to easy find your car position, simply press button
when in armed after 8sec. The system will respond by 5 chirps and 5 lights flash.

- Valet mode:

To enter valet mode: Disarm the system and turn Ignition switch to ON position then press
button + for over 2 seconds, or press Valet/over-ride switch for over 5 seconds, until
siren give 1 long with 1 short chirp and LED light ON to confirm the system is in valet mode.
2-way LCD display:
When the system is in the valet mode it can not be armed. The door lock and unlock will
function as keyless entry system.
To exit valet mode:
Turn Ignition switch to ON position , then press button
Valet/over-ride switch for 5 seconds. You will hear siren provide 1 long with 2 short chirps
and LED light OFF to confirm exit this mode and in alarm mode. The 2-Way remote will
respond 1 long and 2 short beeps.

- Ignition controlled door lock/unlock(programmable):

If programmed with this feature, turn Ignition ON after 10 seconds the doors will auto
locked , but within this 10 seconds the door has been opened this feature will bypassed,
till next time of ignition on.
When turn Ignition OFF, the doors will unlock for take off, if programmed with ignition off
door unlock.
Note: You may manage lock and unlock doors in ignition on position by short pressing
button

- Passive immobilizer (programmable):

If programmed with this function, when turn off ignition switch for 30 seconds or you open
and close the door, it will disable the engine starter right way . The LED will flash twice
per second.
2-way LCD display :
Exit: To disarm this function by (1) simply press button
to lock door or pressing
Note:
Under Valet mode, each time
turn Acc off , the siren will give
2 chirps for notification.
+ for over 2seconds, or press
to unlock door.
once. LED off.
+ Two beep sound
once