Eaglemaster E5 G7 User Manual page 10

Standby Anti Hi-Jack :
Red flashing
when pressing
Remote Anti Hi-jack :
Red flashing
when pressing
Valet mode:
Red flashing
when pressing
Zone-1 sensor bypass:
Press once
Press twice
Car search mode:
Press once
Response
1 siren chirp to indicate in standby mode
Response
0.5sec.
or
0.5sec.
+
Ignition ON, press
Response
0.5sec.
or
0.5sec.
Response
2 siren chirp to indicate 1st stage sensor bypass
Response
3 siren chirp to indicate 1st stage sensor bypass
Arming status after
Response
0.5sec.
or
0.5sec.
Ignition ON, press arm button over 2sec.
Ignition ON, press
1 green flash to indicate arming
Red flashing to indicate failed receiving
both buttons over
1 green flash to indicate turn on the mode
1long + 1short chirps given
Red flashing to indicate failed receiving
Arming status within
5sec., press button
1 green flash to indicate arming status
Red flashing to indicate failed receiving
both buttons over
2sec.
5sec., press button
again
2sec.
status
again