Eaglemaster E5 G7 User Manual page 26

- CH-7 (-) programme time output:
This channel-6 is a negative (-500mA) output features, this channel can be programmed
(1)- Arming output from 1~120sec.
(2)- Press button
(1)- Arming output 1~120sec. if programmed, this channel will activate when arming, the
output timing can be programmed from 1 to 120seconds.
(2)- Press button
button
Exit: When this channel is outputting, if press button
NOTE: This channel can be programmed pulse delay time (1~120sec.), If programmed,
channel-6 will delay output with programme pulse delay time.
Control the Parking Lights pulse output:
The parking lights output can be programmed 2 types pulse output (A-pulse: Normal car /
B-pulse: Hazard switch), if programmed with B-pulse output, the parking lights output
(any white wire) is connected to the car's hazard switch. White/red wire connect to the
(+12V or - Ground) , for the signal power source of hazard switch.
The pressing of hazard switch creates stable electrical signal, when the signal is present,
the parking lights are flashing.
First push hazard switch
Hazard SW.
Parking Lights.
Using this method, the alarm imitates car's hazard sw. button clicks. Connecting the alarm's
white wire to the hazard sw. button.
Hazard SW.
(White wire)
Parking Lights.
Arm the system, alarm is generated
one turn on of parking lights.
too long, parking lights will flash
This T1 time length can be
Disarm the system,
take two parking lights flashes. If
only once. If T2 time is too long, parking
This T2 time length can be
, output from 1~120sec.
output 1~120sec. If programmed, to operate this channel by press
for over 2sec. This channel will constant output for programme time.
Arm
T1
T1 length pulse. During the time of T1, it must only take
If T1 time is too short,
more than one time.
programme 0.3~0.6sec.
alarm is generated
T2 time is too short, parking
programme 0.6~0.9sec.
parking lights will
T2 length pulse. During the time of T2, it must only
lights will flash more than two time.
once, it will stop outputting.
Second push hazard switch
Disarm
T2
not flash. If T1 time is
lights will not flash. or flash