Eaglemaster E5 G7 User Manual page 24

2-way remote car alarm system with 868 mhz frequency - fsk solution
Table of Contents

Advertisement

Control Channel (-) features:
- Comfor t /window close :
If programmed with the feature, this channel will constant output for 30sec. when arming the
system.
- 2nd stage door unlock:
If programmed with the feature , to operate it by press button
other doors unlock (passenger's side).
- Remote latched:
If programmed with the feature, to operate it when ignition off, press button
2sec., siren will give 1 chirp and the Channel will constant output.
To exit by ignition off and press button
channel will stop output.
- Dome Light:
If programmed with the feature , the channel will constant output 30sec. when disarming .
Turn ignition switch ON will stop the channel output.
- Pager :
If programmed with the feature, this channel will output when system triggering .
-Ar m W/Engine r unning:
If programmed with the "Arm W/Engine running, this feature for the car to keep engine
running after arriving at your destination.
To operate this feature by pressing
give one chirp and the LED will start flashing, at the time the system is in standby mode, the
owner must follow under process to activate the "Arm W/Engine running " mode:
(1) Within 15sec. Turn Ignition OFF (engine still keep running), open and close door to leave
the car.
Note:
If within this 15sec. press any button once will exit the mode, LED off.
(2) While leaving the car by open and close the door, within 5sec. press button
system will arm and door lock immediately, the parking lights will keep flashing,
however the engine will still keep running. The 2-Way remote will respond under icons
flashing as long as turbo time finished.
Exit mode :
Pressing button
will exit Engine run mode and turn back in armed position.
NOTE:
1. In engine running mode, the sensor zone trigger will be bypassed until the programme
time finished.
2. In engine running mode, if door, hood or trunk has been triggered, engine will stop
running and alarming the system, simply press button
Flash icon
once of the remote control within engine running mode , the system
over 2sec., siren will give 2 chirp and the
for 2sec. while driving or ignition ON , the siren will
Note:
(1) After leaving the car , within 5sec.
If press wrong button will exit mode.
(2) After leaving the car , within 5sec.
If without press
mode automatically.
at 2nd times , to control the
button will exit
to disarm the system.
for over
once, the

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents