Eaglemaster E5 G7 User Manual page 8

2-way remote car alarm system with 868 mhz frequency - fsk solution

Table of Contents

Functions

Silent armed

Valet mode

Remote button lock (on/off)

Vibrate mode on/off

Battery conserve mode

Time adjust mode

Alarm clock time setting

Countdown timer

Remote battery discharge/replacement

If the battery becomes exhausted, the remote will emit extra long beep, While press any

button on the remote, few seconds later the

The battery discharge is displayed on the LCD screen as the icon with the status

indicator . Also you can pay your attention that the effective distance for the transmitter is

being reduced.

To replace the batteries of 2-way remote

- Bend the top part of the cover a bit, move it up and remove,

- Remove the discharged battery,

- Place the new battery (AAA) observing polarity,

- Carefully place the cover back.

To replace the batteries of 1-way remote

- Loose the screws on the back side of the transmitter housing and separate two

halves of the transmitter housing,

- Remove the discharged battery,

- Place the new battery 12V 23A observing polarity,

- Carefully place the cover back (please do not damage the LED and switchers on the

Circuit board);

tighten the screws on the back side of the transmitter housing.

Step

Press

over 2sec. Until 1 beep given.

Press