About Your System Congratulations on your purchase of this state-of-the-art vehicle security system. With proper installation this system will provide superior protection and performance for many years to come. What is included: A control module 2-way pager transceiver antenna One 5-button 2-way LCD remote transmitter One 3-button random code remote transmitter Dual stage shock sensor High output 6-tone siren...
2-way LCD Remote Transmitter Description #TX-37 #TR-55 Functions of remotetransmitter buttons Button to arm the system (ARM) Button to disarm the system (DISARM) Button to control TRUNK Programmed channel Button to check car status , to turn on LCD back light Button to Silent arm the system (SILENT) System maintenance This system needs no specific maintenance beyond 2-wayremote control battery...
Page 4
2-way LCD icons instructions System Armed & System Disarmed & Transmission & Transmit Door Locked Door Unlocked Range Indicator Silent Armed & Hood & Trunk opened Door opened when Armed Door Locked when Armed Light touch shock sensor Heavy impact shock Door triggered warning sensor triggered...
1-Way & 2-Way Remote Function Table: Functions Step Condition Arm and door lock Press once Disarmed & ACC off Arm without siren chirp Press once then within 3sec. press once Disarmed & ACC off Disarm and door unlock Press once Armed Disarm without siren chirp Armed...
Alarm Page If the alarm system is triggered while armed, an Alarm Page will be sent to the remote control. When the remote receives an Alarm Page, the LCD icons will display the alarm system status information and the remote control will generate beeps. Display Beeps Vibrations...
Vibrate mode on/off (this feature may apply to the model "E2-LCD-VB") Press button for over 2sec. the 2-way remote will respond tone & vibrate feature, the button pressing 2sec. will change the feature, see under table: Beeps Vibrations 2-way remote feature 1-beep 1-time Remote with tone and vibration...
- Arm without siren chirp : To arm your system without siren chirp , simply press button once then within 3sec. press button once. Note: this features is only activated under the system is in disarmed and Acc off position,. - To DISARM the system : To disarm your system within proper operating range, simply press button once (while...
- Disarm without siren chirp : To disarm your system without siren chirp , simply press button once then within 3sec. press button once. Note: this features is only activated under the system is in armed position,. - Silent arm mode : The system provide a feature to turn OFF the siren, simply press 2-way button once (while system in disarmed or Acc off position) .
- Car search mode: The system provide a feature to easy find your car position, simply press button once when in armed after 8sec. The system will respond by 5 lights flash. - Dual stage shock sensor: This device only activates after 8 seconds of arming state; this is preventing from the weak impact caused by the driver while leaving the car.
- Ignition safety door lock select (programmable): If programmed with this feature, turn Ignition ON after 10 seconds the doors will auto locked , but within this 10 seconds the door has been opened this feature will bypassed, till next time of ignition on. When turn Ignition OFF, the doors will unlock for take off. Note: You may manage lock and unlock doors in ignition on position by short pressing button to lock door or pressing...
Page 12
- Channel-2 (-) output(programmable): This channel "Orange/black wire" is a negative (-500mA) output features, this feature can be controlled " Disarmed output / Turbo mode (engine running) / Dome light " , 2nd killer: If programmed with the feature , the channel will constant output when the system disarmed, this feature normally for 2nd immobilizer.
Turbo mode: Same instructions / operation as Channel-2 turbo time mode. 2nd stage unlock: If programmed with the feature , t o operate it by press button at 2nd time , 2nd stage unlock will be output for passenger side . -Channel-4 (-) output(programmable): This channel "Pink wire"...
Page 14
Exit Remote Anti car-jacking mode: 1- Within 90sec: After enter this mode, turn ignition on and press button for 3 times within 3sec.,LED will off to confirm exit this anti car-jacking mode and siren will give 2 chirps. 2- After 90sec: To exit this mode must use your PIN code, please see under "How to use your PIN code".
R.F Antenna CALL SWITCH : The R.F antenna module provide a switch which can be send a signal to the 2-way remote. In disarmed or ACC on position, if press Call switch for 2 seconds, lights will flashing 5 times and the 2-way remote will give pre-warn beep sound and display LCD.
P R O G R A M M E M O D E T AB L E Press button Press twice Press once Press 3 times PROGRAMME FEATURES Item NO by LED flash 2-chirp 3-chirp 1-chirp *W/I Ignition on safety door lock *W/O Passive arming &...
System Installation: 1. Thoroughly read and become familiar with the installation instructions before beginning the installation. 2. Review system contents: (1). A control module. (2).2-way pager transceiver antenna with call switch and LED . (3). One 5-button 2-way LCD remote transmitter. (4).One 4-button random code remote transmitter (5).Dual stage shock sensor (6).High output 6-tone siren (optional ) (7).40A block relay CO/NC output...
WIRING DIAGRAM On board blocking relay (40A) Black 30 - Common Black 87 - Normal closed H1 20-PIN CONNECTOR Plug-in dual stage shock sensor Dual-stage/zone Shock Sensor Call switch R.F Antenna Blue LED Antenna indicator Blue LED Extend the whole wire, align it indicator with the intersection of dashboard and the front window glass.
Page 19
20pin main port wiring : Connect to Chassis Black(-) Central door Ground (-) lock wiring Blue/red Connect to Red Unlock N/O from Siren Brown(+) Blue Unlock Com Blue/black (-) Ground Unlock N/C Green/red Lock N/O 15Amp Fuse Green Lock Com Green/black Connect to (+) Red (+)
Central door lock wiring: 1.) For Factory installed central door lock system MOTOR CONTROL MOTOR CONTROL ORIGINAL DOWN BUILT-IN DOOR MOTOR LOCK CONTROLLER (Inside of the front door) MAIN LINE Central door lock wiring Green/black Green Green/red Blue/black Blue Blue/red 2.) Directly connect to 2 wire Actuator + 12V 2 WIRE ACTUATOR...