Table of Contents
Advertisement
Quick Links
2 - WAY R E M O T E C A R A L A R M S Y S T E M
Model:
LED type
IMPORTANT:
Please read the entire manual for complete details on the features, accessories and
operation before attempting to use your security system.
This Security system must be installed by a qualified technician to ensure proper
operation. Do not attempt to install or modify this system yourself as
this way void your warranty.
-A202-
Advertisement
Table of Contents
Related Manuals for Eaglemaster E2
Summary of Contents for Eaglemaster E2
- Page 1 2 - WAY R E M O T E C A R A L A R M S Y S T E M Model: LED type IMPORTANT: Please read the entire manual for complete details on the features, accessories and operation before attempting to use your security system.
-
Page 2: About Your System
About Your System Congratulations on your purchase of this state-of-the-art vehicle security system. With proper installation this system will provide superior protection and performance for many years to come. What is included: A control module 2-way pager transceiver antenna One 5-button 2-way LED remote transmitter One 3-button or 4-button random code remote transmitter Dual stage shock sensor High output 6-tone siren... - Page 3 2-way LED Remote Transmitter Description Shock sensor Arm/Disarm indicator (Green) indicator (Red) Ignition/immobilizer Hood/Trunk indicator (Red) indicator (Orange) Receive/Transmit Door indicator (Yellow) indicator(Blue) Button 1 Button 4 Low battery Button 2 indicator(Red) Button 3 Button 5 TR-4LED System maintenance This system needs no specific maintenance beyond 2-wayremote control battery replacement.
-
Page 4: Command Page
1-Way & 2-Way Remote Function Table: Functions Step Condition Arm and door lock Press once Disarmed & ACC off Arm without siren chirp Press once then within 3sec. press once Disarmed & ACC off Disarm and door unlock Press once Armed Disarm without siren chirp Armed... -
Page 5: Alarm Page
Melody 4 Ignition triggering flash within 20sec. NOTE: Vibrations features may apply to the model No: "E2-LED-VB". Page Recognition (Acknowledgement) To clear a page alert/notification, quickly press any button on the remote control. This can be performed at any time during or after the page notification has occurred. -
Page 6: Standard Features
STANDARD FEATURES: To ARM the system: To arm your system within proper operation range, simply press button once (while system in disarmed or Acc off position) . The system will respond one siren chirp, one lights flash, doors lock, disable engine starter, LED will begin flashing quickly until all sensor inputs are active - LED will start blinking slowly (flash once per second) to indicate the system is full armed. - Page 7 - Disarm without siren chirp : To disarm your system without siren chirp , simply press button once then within 3sec. press button once. Note: this features is only activated under the system is in armed position,. - Silent arm mode : 1-way The system provide a feature to turn OFF the siren, simply press button once...
- Page 8 - Remote sensor by pass : This system offer 2stage sensor optional. Within 8sec. after set arming, to press button once , the system will give 2 short chirps and 2 lights flash, thus the 1st stage shock sensor has been turn off. Press button once again, within 8sec.
- Page 9 - Channel-2 (-) output(programmable): This channel "Orange/black wire" is a negative (-500mA) output features, this feature can be controlled " Disarmed output / Turbo mode (engine running) / Dome light " , 2nd killer: If programmed with the feature , the channel will constant output when the system disarmed, this feature normally for 2nd immobilizer.
-
Page 10: Power Disconnecting Memory
-Channel-4 (-) output(programmable): This channel "Pink wire" is a negative (-500mA) output features, this feature can be controlled " Window output / Turbo mode / Horn". Window close : If programmed with the Window output feature, this channel will constant outputting for 30 seconds when system armed for window close feature. -
Page 11: Anti Car-Jacking
- Anti car-jacking: This feature will protect your vehicle in the event that there is an attempt to Hi-jack the vehicle. Alternative "Remote activation" or "ACC ON with door open and closed " is available by programming . While system is trigger anti-car jack mode, lights will flash once and the LED will fast flashing to show the system is enter anti-car jacking mode. - Page 12 Transmitter & PIN code programming: This programming features is provide the owner to learn the new transmitter or set new PIN code into the system memory. This system can expand 4 different transmitters, and comes from factory with two transmitters already programmed into the system memory. The PIN code from 1 ~30 numbers is available to set into the system memory.
-
Page 13: Programme Mode Features
Programme mode features: Many of the operating settings of this unit are programmable. The programmable mode setting dictates how the unit operates. To enter programme mode and access Feature Change: 1. Disarmed the system, turn ignition from ON to OFF, within 10 seconds press valet Switch ON-OFF for 8 times. -
Page 14: System Installation
System Installation: 1. Thoroughly read and become familiar with the installation instructions before beginning the installation. 2. Review system contents: (1). A control module. (2).2-way pager transceiver antenna (3). One 5-button 2-way LED remote transmitter. (4).One 3-button or 4-button random code remote transmitter (5).Dual stage shock sensor (6).High output 6-tone siren (optional ) (7).Status LED indicator (8).Valet over-ride switch... - Page 15 -14-...
-
Page 16: Central Door Lock Wiring
Central door lock wiring: 1.) For Factory installed central door lock system MOTOR CONTROL MOTOR CONTROL ORIGINAL DOWN BUILT-IN DOOR MOTOR LOCK CONTROLLER (Inside of the front door) MAIN LINE Central door lock wiring Green/black Green Green/red Blue/black Blue Blue/red 2.) Directly connect to 2 wire Actuator + 12V 2 WIRE ACTUATOR... - Page 17 Model: LED type...