Table of Contents
Advertisement
- Car search mode:
The system provide a feature to easy find your car position, simply press button
when in armed after 8sec. The system will respond by 5 chirps and 5 lights flash.
-Comfort /window close :
This channel "White/black wire" is a negative (-500mA) output features, this feature can be
controlled " window close when arming". This function will constant output for 30sec.
When arming the system. Note: sensor will be bypassed when this channel is activating.
- Valet mode:
To enter valet mode: Disarm the system and turn Ignition switch to ON position then press
button
+
for over 2 seconds, or press Valet/over-ride switch for over 5 seconds, until
siren give 1 long with 1 short chirp and LED light ON to confirm the system is in valet mode.
2-way LCD display:
When the system is in the valet mode it can not be armed. The door lock and unlock will
function as keyless entry system.
To exit valet mode:
Turn Ignition switch to ON position , then press button
Valet/over-ride switch for 5 seconds. You will hear siren provide 1 long with 2 short chirps
and LED light OFF to confirm exit this mode and in alarm mode. The 2-Way remote will
respond 1 long and 2 short beeps.
- Ignition controlled door lock/unlock(programmable):
If programmed with this feature, turn Ignition ON after 10 seconds the doors will auto
locked , but within this 10 seconds the door has been opened this feature will bypassed,
till next time of ignition on.
When turn Ignition OFF, the doors will unlock for take off, if programmed with ignition off
door unlock.
Note: You may manage lock and unlock doors in ignition on position by short pressing
button
to lock door or pressing
- Channel -4 (-) output (programmable):
This channel Yellow/black wire" is a negative (-500mA) output features, this feature
can be controlled " 2nd stage door unlock / Remote latched ".
2nd stage door unlock:
If programmed with the feature , to operate it by press button
door unlock will be output for passenger side .
Remote latched:
If programmed with the feature, to operate it when ignition off, press button
2 seconds, siren will give 1 chirp and the Channel will constant output.
To exit by ignition off and press button
the channel will stop output.
+
to unlock door.
over 2 seconds, siren will give 2 chirp and
-17-
Note:
Under Valet mode, each time
turn Acc off , the siren will give
2 chirps for notification.
for over 2seconds, or press
at 2nd time , 2nd stage
once
for over
Hide quick links:
Advertisement
Table of Contents
