Table of Contents
Advertisement
Appendix-A
This section details the specifications of XG2000CR.
A.1 Product Specifications
The product specifications of the XG2000CR are as follows:
10 Gigabit ports
Serial Port
Management LAN
Indicators
A.2 Installation Specifications
The installation specifications of the XG2000CR are as follows:
Dimensions
(Excluding protrusions)
Maximum weight
Power cord
Power source
Input current
Ambient temperature
Ambient humidity
Temperature gradient
Ambient dust
Ambient noise
Electromagnetic compatibility
Service area
Installation
* : The power cord provided with the device is for exclusive use in the USA or Canada.
Power cords must meet the electrical safety requirements of the country in which the product will be used.
If you use this product in other country or the applied voltage is more than 125VAC, contact your vendor's represen-
tative. (Refer to " Power Cord Requirements (page 7)").
70
Appendix
Specifications
Items
IEEE802.3ae/ak compliant 10 Gigabit Ethernet port × 4
Port1 - Port4
(for XFP modules)
Hot swappable
IEEE802.3ak compliant 10 Gigabit Ethernet port × 16
Port5 - Port20
RS-232C D-SUB9 × 1
Console connection port
10BASE-T/100BASE-TX × 1
Mng-LAN
Power (Green), Alarm (Orange), Status (Green), Rear fan × 2,
LED
Power supply units × 2
Items
Width
Depth
Height
Voltage
Phase
Frequency
XG2000CR on
XG2000CR off
XG2000CR on
XG2000CR off
XG2000CR on
XG2000CR off
Front
Rear
Overview
Specifications
440mm
480mm
43.8mm
14kg
for 3-pin socket (grounded) *
AC100 (-10%) - 240V (+10%)
Single-phase
50 or 60Hz (+2% / -4%)
100-240V 2.0-1.0A/Input
+5 - +40°C (Inlet temperature)
0 - +50°C (Inlet temperature)
20 - 80%RH (Non-condensing)
8 - 80%RH (Non-condensing)
15°C/hr or less (Non-condensing)
0.15mg/m3 or less
55dB or less
FCC Class A
CE Marking
800mm
800mm
1U in a 19-inch rack
Advertisement
Table of Contents
