Replacement Procedure For Digital Kvm Switch - Fujitsu KVM1116Q User Manual

Digital kvm switch
Table of Contents

Advertisement

Replacement procedure for Digital KVM switch

(working time: 30 minutes)
Tools required (not provided)
Phillips screw driver
After replacement work of KVM switch, System administrator will need to reconfigure.
*
Recommended to back up the configuration file. (Operate by System administrator)
*
*
If not find the configuration file, need to reconfigure.
For backup of the configuration file, Please refer to "Backup / Restore (page 79)".
*
1. Remove the cables other than the power cord connected to the KVM switch to be replaced.
There is no need to power off on the server.
(To disconnect and reconnect the KVM adapter cable on the server, it is necessary to power off.)
2. Remove the power cord connected to the KVM switch to be replaced.
3. Remove the two screws on each side of the mounting bracket and remove it from the rack.
*Note:Please remove screws while supporting firmly so as not to drop at the time of removal.
4. If mounting on the back of the rack, remove the mounting bracket from the KVM switch.
5. Install the replacement KVM switch in the rack.
For mounting on the front of the rack, refer to "Rack mounting (page 9)".
For mounting on the back of the rack, refer to "Rack mounting - Rear (page 10)".
For the mounting bracket, use the bracket removed in [Procedure 4].
6. Connect the cable removed in [Procedure 1] to the KVM switch.
7. Connect the power cord to the KVM switch and boot up the KVM switch.
(For the power cord is connected, the power turns on automatically and boot up the KVM switch.)
8. Confirm that the connected server can be referred to from the OSD of the KVM switch.
Initial user name
Initial password
9.
Initial setup
(Operate by System administrator)
For details, please refer to "Super Administrator Setup (page 16)".
10. For changing the setting of the KVM switch from the initial value, set the KVM switch.(Operate by
System administrator) Please refer to "On screen display (OSD) operation (page 12)" for setting
method.
:
admin
:
admin
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents