Attaching An Incompatible Switch Model; Setting Up A Kvm S3-1621 Appliance - Fujitsu series3-1621 User Giude

Installation
connected to a KVM s2-Adapter PS/2-VGA KVM-IA, the list of appliances in the OSCAR
interface will display both the primary KVM s3-1621 appliance port number, followed by
a dash, and the secondary appliance port number. For example, the Port column for a
secondary earlier appliance model might display 01-02, where 01 is the primary port
and 02 is the secondary port.
2.9.1

Attaching an incompatible switch model

It is possible to attach appliances not listed in the previous table. Incompatible
appliances do not support seamless tiering and devices attached to an incompatible
appliance will not be displayed in the OSCAR menu for the KVM s3-1621 appliance.
Only the name assigned to the incompatible appliance will be displayed.
To access an incompatible appliance from the KVM s3-1621:
Activate the OSCAR interface.
Select the incompatible appliance. The OSCAR menu for the incompatible
appliance will display, and all devices that are attached to the appliance will be
shown in the list of devices.
Select your desired device associated with the incompatible appliance.
You are now connected to that device.
To access the KVM s3-1621 from an incompatible device:
Activate the OSCAR interface.
This will activate the OSCAR interface for both the KVM s3-1621 appliance and the incompatible
appliance.
Select the desire device on the OSCAR interface associated with the KVM s3-1621
appliance.
2.10

Setting up a KVM s3-1621 appliance

With the KVM s3-1621 appliance, you can auto detect and configure each port on the
appliance. Chapter 3 provides detailed instructions on naming customization and
OSCAR interface setup and configuration.
14
590-591-609D