Installation Of Switch: Front Access Or Rear Access (User Configured Airflow) - Fujitsu XG2600 Hardware Manual

XG2600 Hardware Guide
• SFP+ Dummy Caps (Qty 26)
• Rack Mounting Rails (1 set)
• M6 Countersunk Screws (Qty 4)
• M6 Machine Screws (Qty 6) 4 screws for fastening the rack rails to the rear side of the rack, and 2 screws for
• CD-ROM
• EULA
• USB memory is not included in the product package
Note
1.1.2 Installation of Switch: Front Access or Rear Access (User
Con gured Air ow)
There are two options available to install the switch in a di erent direction in a rack that helps suppress heat interference,
depending on user's requirements
Reference See
• Rear-Access Con guration (Factory Default)
The interface side (SFP+ slots) is fa cing backward in a rack, which serves better for connecting the switch to
equipment whose interface side is also located in the backside of the rack such as servers.
• Front-Access Con guration (User Con gured)
The interface side (SFP+ slots) is facing forward in a rack, which serves better for connecting the switch to equipment
whose interface side is facing forward such as other switches, routers, etc.
Choose either of the above to install the switch in the rack, depending on user's requirements.
Dummy caps to prevent dust when the SFP+ slots are open and unplugged.
The dummy caps come with the switch, installed on the slots at the time of purchase.
Rails for mounting the switch in a rack.
Screws for fastening the rack rails to the front side of the rack.
fastening the switch (rack mounting brackets attached to the side of the switch) to the
front side of the rack).
It contains the Firmware and User Guid e (in a PDF format) necessary for operating and
con guring the switch. Adobe Reader is required for viewing.
End User License Agreement for the Product
"2.2.1 Decide Switch Access Con guration" (pg.29) for the detailed instructions for installation.
17
Chapter 1 Getting Started
Items in the Package / Names and Functions