Hardware Description; Front Panel - Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

1

Hardware Description

Hardware Description

This section describes the physical Switch Module as shipped from the factory. For specifications,
such as installed memory, weight and physical dimensions, facility requirements, architectural
specifications, and regulatory compliance, refer to
Module Specifications"

Front panel

Externally accessible ports and LEDs are on the port side of the Switch Module. The front panel
faces out when the Switch Module is inserted in the I/O bay of the Blade Server chassis.
details the front panel. For a complete description of the locations and interpretations of these
LEDs, see
Access the I/O module handle at the front of the port side of the Switch Module. By pressing the
handle's release latch, you can open the handle to remove and insert the unit from the Blade
Server chassis.
FIGURE 1
1. Module status indicator
2. Health indicator
3. Module Locator
4. Port status indicators (See
The Switch Module has a Reset button, which is a small, recessed micro-switch that is accessed by
inserting a pin (or an object of similar size) in the small hole. Depress the Reset button for up to
5 seconds to reboot the Switch Module.
6
"Interpreting LED activity"
Front panel view
"Interpreting LED activity"
Brocade 6545 Gen5 16-Gbps FC Switch Module Hardware Reference Manual
Appendix A, "Brocade 6545 16 Gbps FC Switch
on page 38.
on page 38.)
Figure 1
53-1003184-01