Installing The Brocade 6545 16 Gbps Fc Switch Module; Shipping Carton Contents; Unpacking The Switch Module - Fujitsu Brocade 6545 Gen5 Hardware Reference Manual

Installing the Brocade 6545 16 Gbps FC Switch Module

In this chapter

Shipping carton contents

The following items are included in the shipping carton:
•
•

Unpacking the Switch Module

Perform the following steps to remove the Brocade 6545 16 Gbps FC Switch Module from its
shipping package.
1. Open the shipping box and inspect the contents for damage.
2. Remove the foam layer that sits on top of the switch.
3. Remove the Switch Module from the protective foam surround.
4. Remove the foam ends from the Switch Module.
5. After ensuring that standard electrostatic device (ESD) precautions are made, slide the switch
Refer to the Operating Manual that comes with your Fujitsu PRIMERGY BX900 S2 or PRIMERGY
BX400 Blade Server for additional instructions.
Brocade 6545 Gen5 16-Gbps FC Switch Module Hardware Reference Guide
53-1003184-01
•
Shipping carton contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
•
Installation and safety considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
•
Unpacking the Switch Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
•
Installation and safety considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
•
Preparing the Blade Server for the Switch Module . . . . . . . . . . . . . . . . . . . . . . . . . 13
•
Inserting the Switch Module in the blade server. . . . . . . . . . . . . . . . . . . . . . . . . . . 14
•
Installation and safety considerations when handling transceivers and cables . 17
•
Inserting SFP+ optical transceivers and cables . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
One Brocade 6545 16 Gbps FC Switch Module (with 4 SWL 16-Gbps SFP+ pre-installed)
Brocade 6545 16 Gbps FC Switch Module QuickStart Guide
Do not insert a damaged Switch Module in the Blade Server chassis. If the Switch Module
appears to be damaged, contact your sales representative before proceeding.
out of the antistatic sleeve.
Chapter
2
11