Table of Contents
Advertisement
2
UNIT DESCRIPTION
■ Display
q w ert
!3
!2
!1
q SIGNAL STRENGTH ICON
Shows relative receive signal strength level.
• "
" blinks when the ATS function is in use. (p. 32)
w OPEN SCAN ICON (pp. 22, 23)
Appears when 'Open scan' is selected.
PRIORITY SCAN ICON (p. 24)
Appears when the 'Priority scan' is selected.
GROUP SCAN ICON (p. 24)
Appears when the 'Group scan' is selected.
REPEATER SCAN ICON (p. 25)
Appears when the 'Repeater scan' is selected.
e INTERNAL SPEAKER MUTE ICON (pp. 10, 18)
Appears when the volume level is set to 0 (the audio is
muted).
r LOW POWER ICON (p. 12)
Appears when low output power is selected.
8
y
u i
o
!0
t QUIET ICON (p. 31)
Appears when the Quiet function is ON. (Selcall mute is
activated)
y TONE ICON (p. 26)
➥ "T" appears while the Subaudible tone encoder is used.
"T SQL" appears while the Tone squelch/DTCS
➥
squelch function is used.
u BELL ICON
Appears when the Pocket beep function is used.
➥
(p. 27)
Blinks when the specified Selcall or Smart Ring call is
➥
received. (pp. 30, 32)
i VOICE RECORDER ICON (p. 15)
Appears when the Voice Recorder function is turned ON.
o CHANNEL READOUT
The operating channel number is displayed.
!0 CTCSS/DTCS READOUT (p. 26)
The CTCSS tone frequency or DTCS code is
➥
displayed.
➥ Appears when the Tone squelch is set to ON or the
Pocket beep function is selected.
!1 NAME DISPLAY
The operating channel name and channel type are
displayed.
Hide quick links:
Advertisement
Table of Contents
