Options; Specifications And Options - Icom ic-450 Instruction Manual

Hide thumbs Also See for ic-450:
Table of Contents

Advertisement

10

SPECIFICATIONS AND OPTIONS

Specifications
D
Receiver (Continued)
[RX (450.000–520.000 MHz)] (Except CB (476.425–477.4125
MHz))
• Sensitivity (12 dB SINAD):
• Hum and noise:
• Conducted spurious radiation: Less than –57 dBm
• Audio frequency response: +2 dB to –8 dB of 6 dB/octave from
All stated specifications are subject to change without notice or
obligation.
36
0.25 µV typical
45 dB typical
(9 kHz–1.0 GHz)
Less than –47 dBm
(1.0 GHz–4.0 GHz)
300 Hz to 2550 Hz
(at the 1 kHz reference)

■ Options

D
Microphone
• HM-212
hand microphone
Wired remote control microphone with key backlight. The same
microphone that is supplied with the transceiver.
• OPC-2355
extension cable
2.5 m microphone extension cable. Same cable as supplied with
the transceiver.
D
Speaker
• SP-22/SP-35
external speaker
Compact and easy to install.
D
Cloning software
• CS-450
+ OPC-1122U
cloning software
Provides quick and easy entry for items, such as set mode
contents, zone type, and so on using the PC's USB terminal.
usb cloning cable

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents