Installation Methods - Icom ic-450 Instruction Manual

1
ACCESSORIES AND INSTALLATION
Installation and Connection (Continued)
■
D Installation methods
<Sample 1: IC-450 is installed under the driver's seat.>
< Sample 2: IC-450 is installed under the glove compartment
or on the center console.>
Main unit
Main unit
2
Microphone
D Using the mounting bracket
Drill 3 holes where you want to install the mounting bracket.
q
•
Approximately 5.5~6 mm when using nuts;
approximately 2~3 mm when using self-tapping screws.
Use the supplied screws, nuts and washers to attach the
w
mounting bracket, and tighten them firmly.
e Insert the mounting bracket's rail to the transceiver's slot,
then slide the transceiver to attach to the mounting bracket.
Flat washer
Spring washer
Rail
Slot
When using
self-tapping screws