Table of Contents
Advertisement
■ Backlight
The transceiver has backlight modes for night-time and low-
light operations.
Push
to enter the menu mode, and then select
q
"Settings."
Push [
] or [] to select "Backlight," and then push []
w
to enter the display backlight selecting mode.
Push [
] or [] to select the desired display backlight
e
mode, and then push [] to set.
• Off:
No Backlight.
• Auto: Lights for 5 seconds when any key except [PTT] is
pushed, or when a Selcall signal is transmitted or
received.
• Auto2: Lights for 5 seconds when any key except [PTT] is
pushed, when a Selcall signal is transmitted, or when
the displayed is changed.
• On:
Backlight is continuously lit.
Push [�] to select "On."
r Push
to exit the backlight setting mode.
■ Voice recorder
The transceiver has a voice recorder function for recording
messages. You can turn the function ON in the set mode. The
received message is automatically recorded and saved. (p. 19)
D Recording a message
Hold down
for 2 seconds to standby for recording.
➥
• The recording starts when a signal is received.
Hold down for 2 seconds
➥
• The recorded message is saved in the "Rec Data" menu.
• You can access the "Rec Data" menu by pushing
Displayed when the Voice
Recorder function is turned ON
and there are recorded messages.
• "
and "
is paused.
D Playing the recorded message
Push
to access the "Rec Data" menu.
q
Push [
] or [] to select the message to play between
w
the 10 latest messages.
Push [
] to play the message.
e
NOTE: The transceiver can record up to 10 latest
messages. If the number exceeds, the oldest message is
automatically deleted.
3
BASIC OPERATION
again to stop recording.
.
" blinks while recording
" is displayed while recording
3
15
Hide quick links:
Advertisement
Table of Contents
