Checking The Ip Address On The Digital Press - Xerox Splash RPX-iii 700 Troubleshooting Manual

T
ROUBLESHOOTING

Checking the IP address on the digital press

If you cannot complete the Direct Connect connection, the IP address on the digital press
may be set incorrectly. To fix this, do the following:
• Quit the EFI Splash RPX-iii.
• Set the IP address using the Control Panel (see
using the Control Panel"
• Wait until the Fiery Start Page prints.
You may have to manually restart the Fiery (see
N :
OTE
• Verify that the IP address on the Start Page is correct.
• Start the EFI Splash RPX-iii.
Setting the IP address
The following procedure explains how to set the digital press to a fixed IP address using the
the digital press Control Panel.
T
O CONFIGURE THE DIGITAL PRESS
1 Power on or wake up the digital press.
Wait for the Network and Web applications to illuminate on the digital press.
2 Press the Log In/Out button on the digital press.
3 Type the ID using the keypad, and then press Confirm on the Control Panel.
The ID is usually "11111".
N :
OTE
4 Press Machine Status > Tools > Network Controller Settings > Connectivity & Network Setup on
the Control Panel.
5 Press 2 TCP/IP - Get IP Address and press Change Settings.
6 Press Static and press Save.
7 Press 3 TCP/IP - IP Address and press Change Settings.
on page 10).
IP C
ADDRESS USING THE ONTROL
"To configure the digital press IP address
page 15).
P
ANEL
10