Dial Plan - Linksys SPA 900 Series Administration Manual

Ext Tab

Dial Plan

The following parameters do not apply to the SPA901.
Note
The default dial plan script for each line is as follows:
(*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx.). The syntax for a dial plan
expression is as follows:
Table 5-1
Dial Plan Entry
*xx
[3469]11
0
00
[2-9]xxxxxx
1xxx[2-9]xxxxxx
xxxxxxxxxxxx.
If IP dialing is enabled, one can dial [user-id@]a.b.c.d[:port], where '@', '.', and ':' are dialed by
entering *, user-id must be numeric (like a phone number) and a, b, c, d must be between 0 and 255, and
port must be larger than 255. If port is not given, 5060 is used. Port and User-Id are optional. If the
user-id portion matches a pattern in the dial plan, then it is interpreted as a regular phone number
according to the dial plan. The INVITE message, however, is still sent to the outbound proxy if it is
enabled.
Linksys IP Phone Administrator Guide
5-46
Dial Plan Script Syntax
Chapter 5 Linksys IP Phone Field Reference
Functionality
Allow arbitrary 2 digit star code
Allow x11 sequences
Operator
International Operator
US local number
US 1 + 10-digit long distance number
Everything else (Int'l long distance, FWD, ...)
Firmware Version 5.1