Entering And Saving Settings - Linksys SPA 900 Series Administration Manual

Using the 900 Series LCD Display
Table 3-2
Label (SPA962 Label)
change (Change)
clear (Clear)
copy (Copy)
delChr (DeleteChr)
delete (Delete)
dial (Dial)
edit (Edit)
ok (OK)
paste (Paste)
play (Play)
save (Save)
select (Select)
y/n (Y/N)

Entering and Saving Settings

The SPA900 Series phone GUI lets you enter alphanumeric and numeric inputs. You can enter the
following data types into the phone:
•
•
•
•
When more than one data type applies to an entry, the phone shows a soft key for switching input modes
among the types: you can scroll through the available types, such as num, alpha, or IP. The cursor also
changes according to
Table 3-3
Input Mode
Numeric
Alphanumeric
IP Address
Linksys IP Phone Administrator Guide
3-4
Setup Soft Keys
Numeric string, such as a phone number when dialing
Alphanumeric string, such a name when adding a directory entry
IP address, such as a DNS server IP address
Boolean (y/n), such as enabling or disabling the DHCP option or selecting a preferred audio device
or ring tone
Table 3-3, to indicate your current input mode:
Input Modes
Soft Key
num
alpha
IP
Description
Changes the ring tone feature.
Clears the entire entry.
In a directory, use the Navigation button to highlight an entry, then
press to copy an entry.
Deletes the last character entered.
Deletes an entry.
Places a call to the number highlighted on the LCD screen.
Edits part of an entry.
Confirms an operation.
Use the Navigation button to highlight an entry in the personal
directory and press paste to place a copied entry
Plays ring tones.
Saves changes.
Chooses an item to change or view.
Toggles between yes and no settings.
Cursor (appending)
Blinking underscore _
Blinking full-height
block ¶
Blinking half-height
block .
Chapter 3 Managing Linksys IP Phones
Cursor (inserting)
Blinking vertical line |
Blinking open rectangle
.
Blinking half rectangle .
Firmware Version 5.1