Linksys SPA 900 Series Administration Manual page 41

Using the Interactive Voice Response Interface
Table 2-2 IVR Options (continued)
Set Static IP Address
Check Network Mask
Set Network Mask
Check Static Gateway IP
Address
Set Static Gateway IP
Address
Check MAC Address
Check Firmware Version
Check Primary DNS
Server Setting
Set Primary DNS Server
Check administration web
server port
Check LAN IP Address
Check PBX multicast
address
Set PBX multicast
address
Enable/Disable
administration web server
Linksys IP Phone Administrator Guide
2-18
111 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
120 None
121 Enter value using numbers on
the telephone key pad. Use
the * (star) key when entering
a decimal point.
130 None
131 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
140 None
150 None
160 None
161 Enter IP address using
numbers on the telephone
key pad. Use the * (star) key
when entering a decimal
point.
170 None
210 None
180 None
181 Enter IP address and port.
Use * key for entering a dot.
For example,
224.168.168.169:8089 is
224*168*168*169*8089.
7932 Enter 1 to enable
Enter 0 to disable
Chapter 2
DHCP must be "Disabled," otherwise you
hear, "Invalid Option," if you try to set
this value.
Requires password
IVR announces the current network mask
of SPA.
DHCP must be "Disabled," otherwise you
hear, "Invalid Option," if you try to set
this value.
Requires password
IVR announces the current gateway IP
address of SPA.
DHCP must be "Disabled," otherwise you
hear, "Invalid Option," if you try to set
this value.
Requires password
IVR announces the MAC address of SPA
in hex string format.
IVR announces the version of the
firmware running on the SPA.
IVR announces the current setting in the
<Primary DNS> parameter.
Requires password
IVR announces the port that the web
server is listening on. (Default is 80)
IVR announces the current IP address of
the LAN port.
IVR announces the current value.
Enter a * between the IP address and the
Port fields. Requires password
Requires password
Firmware Version 5.1
Getting Started