Tab (Spa962 Only); General - Linksys SPA 900 Series Administration Manual

Chapter 5 Linksys IP Phone Field Reference

932 Tab (SPA962 only)

This tab includes the following sections:
•
•
•

General

Field
Subscribe Expires
Subscribe Retry Interval
Unit 1 Enable
Subscribe Delay
Test Mode Enable
Unit 2 Enable
Server Type
Call Pickup Code
Firmware Version 5.1
General, page 5-51
Unit 1, page 5-52
Unit 2, page 5-53
Description
Specifies how long the subscription remains valid. After the specified period of time,
elapses, the SPA932 initiates a new subscription.
Defaults to 1800.
Specifies the length of time to wait to try again if subscription fails.
Enables or disables the first SPA932 unit (each SPA962 can have up to two SPA932s
attached).
Length of delay before attempting to subscribe.
Defaults to 1.
Enables or disables test mode. When test mode is enabled, the LEDs are turned on when
keys are pressed, going from off to green to red, and back to off. In test mode, when all
the buttons on the sidecar are returned to off, all the keys become amber. The SPA962
must be rebooted after the test is completed.
Enables or disables the second SPA932 unit (each SPA962 can have up to two SPA932s
attached).
Selects the type of server used.
The star code used for picking up a ringing call.
Defaults to *98.
932 Tab (SPA962 only)
Linksys IP Phone Administrator Guide
5-51