Spa932 Status; Linksys Ip Phone Administrator Guide - Linksys SPA 900 Series Administration Manual

SPA932 Status

SPA932 Status
This page provides two tabs to display the status of up to two SPA932 units that are supported by a single
SPA962:
•
•
Each tab provides the read-only fields described in the following table:
Field
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
Type
Line
Station

Linksys IP Phone Administrator Guide

5-54
Unit 1—Displays information about the first SPA932 sidecar unit.
Unit 2—Displays information about the second SPA932 sidecar unit.
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After the subscription expires, the SPA932
automatically requests a new subscription.
Displays the version of the hardware.
Displays whether the unit is powered on and connected or not.
Displays the length of time the SPA932 waits to try again if subscription fails.
Displays the version of the software currently running on the unit.
Displays the name assigned to each key (1-32) on the SPA932 sidecar unit.
Displays the function enabled for each key (1-32) on the SPA932 sidecar unit.
Displays the extension assigned to each key (1-32) on the SPA932 sidecar unit.
Displays the subscribe URI configured for each key (1-32) on the SPA932 sidecar unit.
Chapter 5 Linksys IP Phone Field Reference
Firmware Version 5.1