Vertical Service Activation Codes - Linksys SPA 900 Series Administration Manual

Regional Tab
Field
Interdigit Long Timer
(Not applicable to SPA901)
Interdigit Short Timer
(Not applicable to SPA901)

Vertical Service Activation Codes

The following Vertical Service Activation Codes are automatically appended to the dial-plan.
Some of the following parameters do not apply to the SPA901.
Note
Field
Call Return Code
Blind Transfer Code
Call Back Act Code
Call Back Deact Code
Cfwd All Act Code
Cfwd All Deact Code
Cfwd Busy Act Code
Cfwd Busy Deact Code
Linksys IP Phone Administrator Guide
5-22
Description
Long timeout between entering digits when dialing. The interdigit timer values are used
as defaults when dialing. The Interdigit_Long_Timer is used after any one digit, if all
valid matching sequences in the dial plan are incomplete as dialed. Range: 0–64 seconds.
Defaults to 10.
Short timeout between entering digits when dialing. The Interdigit_Short_Timer is used
after any one digit, if at least one matching sequence is complete as dialed, but more
dialed digits would match other as yet incomplete sequences. Range: 0–64 seconds.
Defaults to 3.
Description
This code calls the last caller.
Defaults to *69.
Begins a blind transfer of the current call to the extension specified after the activation
code.
Defaults to *98.
Starts a callback when the last outbound call is not busy.
Defaults to *66.
Cancels a callback.
Defaults to *86.
Forwards all calls to the extension specified after the activation code.
Defaults to *72.
Cancels call forwarding of all calls.
Defaults to *73.
Forwards busy calls to the extension specified after the activation code.
Defaults to *90.
Cancels call forwarding of busy calls.
Defaults to *91.
Chapter 5 Linksys IP Phone Field Reference
Firmware Version 5.1