Linksys SPA 900 Series Administration Manual page 134

Chapter 5 Linksys IP Phone Field Reference
Field
Dictionary Server Script
Language Selection
Firmware Version 5.1
Description
Defines the location of the dictionary server, the languages available and the associated
dictionary. The syntax is as follows:
<Dictionary_Server_Script ua="na">
</Dictionary_Server_Script>
Defaults to blank and the maximum number of characters is 512. The detailed format is
as follows:
serv={server ip port and root path};
d0=<language0>;x0=<dictionary0 filename>;
d1=<language1>;x1=<dictionary1 filename>;
d2=<language2>;x2=<dictionary2 filename>;
d3=<language3>;x3=<dictionary3 filename>;
d4=<language4>;x4=<dictionary4 filename>;
d5=<language5>;x5=<dictionary5 filename>;
d6=<language6>;x6=<dictionary6 filename>;
d7=<language3>;x7=<dictionary7 filename>;
d8=<language8>;x8=<dictionary8 filename>;
d9=<language5>;x9=<dictionary9 filename>;
The following is an example value:
<Dictionary_Server_Script ua="na">
serv=tftp://192.168.1.119/;d0=English;x0=enS_v101.xml;d1=Spanish;x1=esS_v101.
xml </Dictionary_Server_Script>
Specifies the default language. The value needs to match one of the languages supported
by the dictionary server. The script (dx value) is as follows:
<Language_Selection ua="na">
</Language_Selection>
Defaults to blank and the maximum number of characters is 512. The following is an
example:
<Language_Selection ua="na"> Spanish
</Language_Selection>
Linksys IP Phone Administrator Guide
Regional Tab
5-29