Proxy And Registration - Linksys SPA 900 Series Administration Manual

Chapter 5 Linksys IP Phone Field Reference
MOH Server
Message Waiting
Auth Page
Default Ring
Auth Page Realm
Conference Bridge URL
Auth Page Password
Mailbox ID
Voice Mail Server
State Agent
CFWD Notify Serv
CFWD Notifier

Proxy and Registration

Note Many of the following parameters do not apply to the SPA901.
Firmware Version 5.1
User ID or URL of the auto-answering streaming audio server. When only a user ID is
specified, the current or outbound proxy is contacted. Music-on-hold is disabled if the
MOH Server is not specified.
Defaults to imusic when used with a SPA9000 IP PBX.
Indicates whether the Message Waiting Indicator on the phone is lit. This parameter is
toggled by a message from the SIP proxy to indicate if a message is waiting. You can
manually modify it to clear or set the flag in the Ext 1-6 tab.
Setting this value to Yes can activate stutter tone and VMWI signal. This parameter is
stored in long-term memory and survives after reboot or power cycle.
Defaults to No.
Specifies whether to authenticate the invite before auto answering a page.
Defaults to No.
Type of ring heard. This corresponds to the Ring Tone on the Phone tab. Choose from No
Ring, 1 through 10, User 1, or User 2.
Defaults to 1.
Identifies the Realm part of the Auth that is accepted when the Auth Page parameter is set
to Yes. This parameter accepts alphanumeric characters.
Defaults to blank.
This is the URL used to join into a conference call, generally in the form of the word
"conference" or "user@IPaddress:port".
Defaults to blank.
Identifies the password used when the Auth Page parameter is set to Yes. This parameter
accepts alphanumeric characters.
Defaults to blank.
Identifies the voicemail box number/ID for the phone.
Defaults to blank.
Identifies the SpecVM server for the phone, generally the IP address and port number of
the VM server.
Reserved feature.
Specifies whether to enable a SIP-B feature regarding the sending of a Notify to the phone
when a call is forwarded elsewhere.
Defaults to No.
Typically, this field is configured with the SIP proxy information.
Linksys IP Phone Administrator Guide
Ext Tab
5-41