Push-To-Talk; Speed Dial 100; Speed Dial 8 - Linksys SPA942 User Manual

Push-to-Talk

Provides intercom-like functionality. This feature allows a user to dial another station where the system will request
the destination station to automatically answer. For this feature to work (called station automatically answers via the
speakerphone), the called station must support an enhanced calling protocol. The calling station must also be in the
called party's Push-to-Talk allowed access list.
Using the Feature
Activate: Using the Feature Code
1. Pick up
HANDSET
2. Dial *50. You will hear a stuttered dial tone then a normal dial tone.
3. Dial the extension of the phone you want to intercom.

Speed Dial 100

Allow a user to use a feature code and 2 digits to complete a call.
Using the Feature
Configure
1. GO OFF HOOK.
2. Press *75. You will hear a stuttered dial tone then a normal dial tone.
3. Using the KEYPAD
with it and then press the
4. The IVR will notify you whether or not the programming was successful.
Use
1. GO OFF HOOK.
2. Press
#
3. Press the Speed Dial 100 Codes 00-99.

Speed Dial 8

Allow a user to hit only one button to complete a call.
Using the Feature
Configure
1. GO OFF HOOK.
2. Press *74. You will hear a stuttered dial tone then a normal dial tone.
Zayo Managed Services
All manuals and user guides at all-guides.com
or press the
SPEAKERPHONE
Enter the Speed Dial 100 Code
key.
#
Linksys SPA942 User Guide
Linksys SPA942 User Guide
KEY.
00-99 plus the NUMBER you want to associate
Page 13 of 14