Back Panel; Spa942 - Linksys SPA 900 Series Administration Manual

Chapter 2 Getting Started
Figure 2-5
The following tables describe the status indicators and controls on the front of the device and the ports
on the back panel of the device.
Front Panel
Feature
LCD display
Telephone keypad
Navigation button
Soft keys 1-4
Line status indicators 1-4

Back Panel

Port
Phone jack
Ethernet ports
Power

SPA942

The SPA942 is similar to the SPA941, but provides two Ethernet ports for connecting to the LAN and
supports Power over Ethernet (see
you are not using a PoE switch. See the table for SPA941.
Firmware Version 5.1
SPA941
Function
Lists device status and configuration options.
Enters numeric digits for initiating a call or for entering
configuration information.
Scrolls between display and configuration options in the LCD
display.
Selects options on the LCD display.
Displays status of each extension.
Function
Connects to the handset.
Connects to the SPA9000 through a local switch.
Connects to the 5-volt power supply.
Figure 2-6). The PA100 power supply must be ordered separately if
Linksys IP Phone Administrator Guide
Linksys 900 Series IP Phones
2-7