Chapter 5
Linksys IP Phone Field Reference
Field
Dial Plan
Enable IP Dialing
Firmware Version 5.1
Description
Dial plan script for this line.
The dial plan syntax is expanded in the SPA to allow the designation of three parameters
to be used with a specific gateway:
•
uid – the authentication user-id
pwd – the authentication password
•
nat – if this parameter is present, use NAT mapping
•
Each parameter is separated by a semi-colon (;).
Furthermore, it recognizes gw0, gw1, ..., gw4 as the locally configured gateways, where
gw0 represents the local PSTN gateway in the same unit.
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith;pwd=xyz
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd=xyz
Example 3:
[39]11<:@gw0>
Enable or disable IP dialing.
Defaults to no.
Linksys IP Phone Administrator Guide
Ext Tab
5-47