Serial Number; Software Version; Hardware Version; Mac Address - Linksys SPA 900 Series Administration Manual

11 Status

10.2 Serial Number

Shortcut: Setup, 10, 2, select
To view the Serial Number, press 2 from the Product Info menu, or scroll down to highlight Serial
Number and press the select soft key. The serial number is also printed on the bottom of the phone.

10.3 Software Version

Shortcut: Setup, 10, 3, select
To view the software version, press 3 from the Product Info menu or scroll down to highlight Software
Version and press the select soft key.

10.4 Hardware Version

Shortcut: Setup, 10, 4, select
To view the hardware version, press 4 from the Product Info menu or scroll down to highlight Hardware
Version and press the select soft key.

.10.5 MAC Address

Shortcut: Setup, 10, 5, select
To view the MAC address, press 5 from the Product Info menu or scroll down to highlight MAC
Address and press the select soft key. The MAC address is also printed on the bottom of the phone.

.10.6 Client Cert

Shortcut: Setup, 10, 6, select
The phone can be configured for secure provisioning using the factory-installed security certificate. To
determine if the Client Certificate is installed on the phone, press 6 from the Product Info menu, or
scroll down to the highlight Client Cert, and press the select soft key.

10.7 Customization

Shortcut: Setup, 10, 7, select
The phone can be configured for customization. Press 7 from the Product Info menu, or scroll down to
the highlight Customization, and press the select soft key. "Open" indicates that the phone can be
customized.

11 Status

To view the status of the phone and extension parameters, press the Setup button and press 11, or scroll
down until Status is highlighted and then press the select soft key. This menu displays read-only
information about the status of the phone and provides the following options.
Linksys IP Phone Administrator Guide
4-14
Chapter 4 SPA900 Series LCD Command Reference
Firmware Version 5.1