www.schaerer.com
The propeller for the mixer is now visible and can be
cleaned with a cloth
Dismantle two-piece mixer bowl
Clean both parts of mixer bowl and mixer hose under
warm running water
Allow all parts to dry completely
Re-assemble all components
On re-assembly, all openings must face in the same
direction.
Replace mixer bowl
Turn stud on bayonet connector back clockwise
Push mixer hose onto mixer bowl fitting again, and
plug in combi spout
Replace milk cover
Ensure that mixer hose is replaced securely.
This is important, as otherwise hot water or hot Choc
may escape.
5.2.3
Milk compartment cleaning
Wipe weekly or as required with a damp cleaning cloth.
5.2.4
Water tank cleaning
Thoroughly rinse out water tank weekly with clear water.
User Manual SCF - EN
03.2010 / Edition 07
Ensure that the spiral guide
is seated and the hose is not
pinched.
Caution.
Scalding hazard.
Observe the Safety
chapter.
Care
43
Need help?
Do you have a question about the Coffee Factory and is the answer not in the manual?