Descaling; Descaling With Water Tank Or Aquaflex - Schaerer Coffee Factory User Manual

www.schaerer.com

Descaling

The water hardness, the water flow, and whether a tank
filter is used determine the schedule for descaling.
This point in time is calculated by the Schaerer Coffee
Factory and displayed.
Descaling is in three stages.
Preparation
y
Descaling
y
Rinsing
y
Do not drink the descaling solution that comes out of
the spout during descaling!
Cleaning fluid / descaler solution runs out of the combi
spout when cleaning / descaling.
Use only Schaerer Descaling Agent for descaling. Any
other descaling product may cause damage to the
coffee machine. No liability is accepted for damage
caused by the use of any other descaling products and
guarantee / warranty claims are not entertained.

Descaling with water tank or Aquaflex

Preparation
The following is needed for descaling:
2 bottles of Schaerer Liquid Descaling Agent
y
(0.75 l each)
3 bottle water (2.25 l)
y
5-litre collection container
y
If the coffee machine is still hot a cooling routine
initially starts. The cooling routine takes 5-10 min.
Displays lead step by step through the program. Follow
the instructions.
Remove water tank
™
Stir descaling solution in water tank with cold water
™
Replace water tank filled with descaling solution
™
Set a container with approx. 5 litres capacity under
™
the hot water spout
User Manual SCF - EN
03.2010 / Edition 07
Software
Total duration of descaling
approx. 80 minutes.
The procedure may not be
interrupted.
Caution.
Descaling agents
are irritants.
Always follow the
instructions on the
package.
Observe the Safety
chapter.
Caution.
Hot steam
and hot water.
Burn hazard.
Scalding hazard.
Observe the Safety
chapter.
25