Headphone Socket; Auxiliary Input Socket; Line Output Socket - Roberts Revival UNO Manual

Headphone socket

A 3.5mm Headphone Socket located on the top left hand corner of the
radio is provided for use with either headphones or an earpiece. Inserting
a plug automatically mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting the volume to a low level before connecting
headphones to the radio.
IMPORTANT: Excessive sound pressure from earphones and headphones
can cause hearing loss.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.

Auxiliary input socket

1. Connect a stereo or mono audio source (i.e. CD player, MP3 player, etc.) to the
Auxiliary input socket.
2. Press On/Off to switch on the radio.
3. Press Mode until the display shows 'AUX IN'.
Note: The Auxiliary Input mode can only be selected when a plug is inserted in
the socket.
4. Adjust the Volume control on your player and on the radio for comfortable listening.
5. Remove the cable from the Auxiliary input socket or press Mode to cancel
Auxiliary Input mode. Note that audio played via the auxiliary input will be played
in mono through the speaker and in stereo through stereo headphones.

Line output socket

A 3.5mm stereo Line out socket located underneath your radio is provided for connecting
the internal loudspeaker. Set the volume control on the radio to minimum if desired.
DC Line Out
7.5V /0.8A
20