Manually Setting The Clock - Roberts Revival iStream2 Manual

Manually setting the clock

Your radio will normally set its clock automatically to UK time after a
connection to the Internet has been established. Should you need to set
the time manually, change the time zone, or manually switch from winter
to summer time (GMT to BST - also known outside the UK as Daylight
Savings Time), then please follow this procedure.
1. Press and release the On/Off control to switch on your radio.
2. Press the Menu button to access the menu for the current mode.
3. Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the system settings menu.
4. To change the time zone setting go to step 11.
To change from winter to summer time go to step 13.
To change the current time or date setting rotate the Tuning/Select
control until 'Time/Date' is highlighted on the display, then press the
control to enter the time and date setting screen.
5. Rotate the Tuning/Select control until 'Set Time/Date' is highlighted
on the display. Press the control to enter the clock setup. The day
digits will fl ash.
6. Rotate the Tuning/Select control until the correct day is shown on
the display. Press the control to enter the selection. The month digits
will then fl ash.
7. Rotate the Tuning/Select control to select the correct month. Press
the control to enter the selection. The year digits will then fl ash.
Clock and Alarms
1
Equaliser
Network
Time/Date
2
Brightness
Contrast
3-7
74