Manually Setting The Clock - Roberts Stream93i User Manual

Manually setting the clock

After a connection to the Internet has been established, your radio will
normally set its clock automatically to the local time zone that was specifi ed
during setup (see page 10). Should you need to set the time manually,
change the time zone, or manually switch from winter to summer time
(from GMT to BST in the UK, also commonly known outside the UK as
daylight savings time), then please follow this procedure.
1. Press the On/Standby button to switch on your sound system.
2. Press the Menu button to access the menu for the current mode.
3. Rotate the Tuning/Select control until 'System settings' is highlighted
on the display. Press the control to enter the System Settings menu.
4. To change the time zone setting go to step 11.
To change from winter to summer time go to step 13.
To change the current time or date setting rotate the Tuning/Select
control until 'Time/Date' is highlighted on the display, then press the
control to enter the time and date setting screen.
5. Rotate the Tuning/Select control until 'Set Time/Date' is highlighted
on the display. Press the control to enter the clock setup. The day
digits will fl ash.
6. Rotate the Tuning/Select control until the correct day is shown on
the display. Press the control to enter the selection. The month digits
will then fl ash.
7. Rotate the Tuning/Select control to select the correct month. Press
the control to enter the selection. The year digits will then fl ash.
Main menu
DAB
FM
AUX in
Sleep
Alarms
System settings
System settings
Equaliser
Network
Time/Date
Brightness
1
Language
Factory Reset
Time/Date
Set Time/Date
Auto update
2
Set format
Set timezone
Daylight savings
Set Time/Date
06 - 04 - 2014
3-7
Set Time/Date
06 - 04 - 2014
13 : 53
13 : 53
76