Sleep Function - Roberts Blutune 40 Manual

Sleep function

Your radio can be set to turn off after a preset time has elapsed. The sleep
setting can be adjusted between 15 and 90 minutes in increments. Ensure
your radio is switched on.
1. When using your radio, press and hold the Sleep button and then
release the button. The sleep symbol
2. Rotate the Tuning control to select the desired sleep time. The sleep
setting will increase in increments from 15 minutes up to 90 minutes.
A further increment will cause the sleep timer to be set to OFF which
will cancel the sleep function.
3. Press and release the Tuning control. The display will exit the sleep
options.
4. Your radio will switch off after the preset sleep time has elapsed.
5. To view the remaining sleep time, press and hold the Sleep button
and then release the button. The remaining sleep time will show on
the display.
6. To cancel the sleep timer and switch off your radio before the chosen
sleep time has elapsed, press and release the On/Off button.
To cancel the sleep timer without switching off your radio, set the sleep
timer to the OFF setting.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
will fl ash on the display.
1,5
2,3
28