Daikin 2MXS40H2V1B Service Manual page 79

SiBE121123_A
How to Set the Temperature and Airflow Rate
When using HOME LEAVE operation for the first time, set the temperature and airflow rate for
HOME LEAVE operation. Record your preferred temperature and airflow rate.
Cooling
Heating
1. Press the [HOME LEAVE] button.
2. Adjust the temperature with
3. Adjust the airflow rate with the [FAN] setting button as you like.
HOME LEAVE operation will run with these settings the next time you start HOME LEAVE
operation. To change the recorded information, repeat steps 1 – 3.
Others
Function and Control
Initial setting
Temperature
25°C
25°C
Make sure [ ] is displayed on the remote controller display.
The set temperature and airflow rate are memorized in the remote controller. When the
remote controller is reset due to replacement of battery, it is necessary to set the
temperature and airflow rate again for HOME LEAVE operation.
The operation mode cannot be changed while HOME LEAVE operation is being used.
Airflow rate Temperature
18 ~ 32°C
10 ~ 30°C
or as you like.
Function of RA Indoor Unit
Selectable range
Airflow rate
5 steps, ,
5 steps, ,
68