Programming 2-Way Remote - Eaglemaster E4 User Manual

Programming 2-way remote

Disable remote receiving
You may turn off the 2-Way remote receiving signal from the main unit. Press button
simultaneously for 2sec. until one long beep is heard. Remote receiving is now
disabled. To turn on receiving again, Press button
beep is heard, remote receiving is now enable.
2-way LCD display :
2way remote button ON/OFF
For safety purpose, this 2-way remote can be lockout the remote button in order not to
mis-touched the buttons. Press button
remote button is now locked. To turn on remote button, press button
until two beeps is heard, remote button is now unlocked.
2-way LCD display :
Vibrate mode on/off
Press button
the button
Beeps
1-beep
1-beep
If set with vibration only
the 2-way LCD will display :
for over 2sec. the 2-way remote will respond tone & vibrate feature,
pressing 2sec. will change the feature, see under table:
Vibrations
1-time
1-time
simultaneously until two long
for over 2sec. until one beep is heard,
2-way remote feature
Remote with tone and vibration
Remote with vibration only
Remote with tone only
for over 2sec.