Way Lcd Remote Transmitter Description - Eaglemaster E4 User Manual

2-way LCD Remote Transmitter Description

PASS
Functions of remotetransmitter buttons
Button to arm the system (ARM)
Button to disarm the system (DISARM)
Button to control TRUNK Programmed channel
Button to check car status , to turn on LCD back light
Button to Silent arm the system (SILENT)
System maintenance
This system needs no specific maintenance beyond 2-wayremote control battery
replacement. The 2-way remote is powered by a 1.5V AAA battery.
Low Battery Notification
If the battery becomes exhausted, the remote will emit extra long beep, and indication
the melody (same melody while battery on ). While press any button on the remote, few
seconds later the
Battery Replacement
Gently pull the end of the battery door away from the top of the remote control then
slide the door up to expose the battery and remove the expired battery. Place the new
battery into the remote control observing the correct polarity. When power is returned
the remote control will light all icons and generate melodies (representing all beeper
tones).
NO.TR-57
indicator will flashing for identify.
#TX-4R